High-Performance Power These Type 130 Miniature DC Toy Motors are a must-have for any DIY enthusiast looking for a reliable and efficient power source for their Arduino hobby projects. With a high torque and low noise design, this motor is capable of delivering smooth and consistent performance, making it perfect for a wide range of … Continue reading PGSA2Z® 3V to 12v Miniature DC Toy Motor for Arduino Hobby Projects DIY
There are some different XK1 SERIES Switches with different 5 Pin’s Position, please check your switch’s 5 pin’s position and make sure if this switch is really you need!!!
16A 125VAC;16A 250VAC;25T125 u .PA66
If you have any quarry regarding this product please contact us
PGSA2Z Dc To Ac Converter DC 12v Battery & Solar To 220v AC Mini Inverter For Multiple Applications Color LED TV, DVD, DTH, DVB, CFL & Mobile Charger.
Latest Technology Solar Converter 100% Brand New and High Quality.
200 Watt 12v DC to AC Mini Inverter for Multiple Applications.
Note:- This Is Not A Battery Charger It Is A Simple Converter & Can Convert DC 12V into AC 220V Output. Can be Directly Used for DTH Box & CFL from any 12V DC Power Source.
If you have any quarry regarding this product please feel free to contact us.
ULN2003 STEPPER DRVIER MODULE: ULN2003A motor driver chip, Chip all the pins already leads for easy connection to use, 5-12V power supply, 4-way signal indicator, Step angle: 5.625 x 1/64, Reduction ratio: 1/64, Phase: 4, Current/Phase: 5V.
If you have any quarry regarding this product please contact us.
This shield is designed to allow you to control a CNC router or milling machine from an board.
It contains 4 driver sockets which allows compatible A4988 driver modules to be inserted providing the ability to drive 3 stepper motor axis (X,Y, & Z) plus an optional 4th auxiliary motor. Additional connectors provide easy connection of end stop sensors and control buttons.
GRBL 0.8c compatible. (Open source firmware that runs on an UNO that turns G-code commands into stepper signals)
4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
2 x End stops for each axis (each axis pair shared by same IO pin) Spindle enable and direction connection.
If you have any quarry regarding this product please contact us
BMP180 is a high-precision, small size, ultra-low power pressure sensor that can be used in mobile devices
Its performance excellence, the absolute accuracy of the lowest can reach 0.03hPa, and low power consumption, only 3μA
BMP180 powerful 8-pin ceramic leadless chip carrier (LCC) ultra-thin package, you can directly through the I2C bus connected with a variety of microprocessors
The Mega is 100% compatible with Arduino IDE and most shields designed for the Arduino mega2560 r3,RoHS Compliant.
The chip is Atmega2560-16au and Atmega16u2, same with the official version.
Improved and expert version: 1. 0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Due that operate with 3. 3V. The second one is a not connected pin, that is reserved for future purposes.
Stronger RESET circuit. Use 5. 5 * 2. 1mm DC barrel jack (compatible with 5. 5 * 2. 5mm DC barrel jack)
It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
If you have any quarry regarding this product please contact us.
This Card Reader module is based on the MF522-AN board and is delivered together with an S50 card, 6 blue key Ring and two matching pin strips
It is applicable for the users who need to design or manufacture the RF card terminal, for example, the development of access controls, electronic door locks or terminals for the time recording
It is compatible with Mifare1 S50, Mifare1 S70, MIFARE Ultralight, Mifare Pro, and MIFARE DESFire
This module can be directly loaded into the various reader molds. It is compatible with Arduino, Raspberry Pi and micro-controller
The module uses a voltage of 3.3V. It can be connected communication with user’s any CPU main-board through several lines of SPI interface; it can ensure stable and reliable work, and reader distance
If you have any quarry regarding this product please contact us
This is the “momentary” variety of the touch sensor – touch and it turns on, release and it turns off
Positive and negative can be used as a touch surface, can replace the traditional touch button
Four M2 screws positioning holes for easy installation. Module can be installed in such as surface plastic, glass of non-metallic materials
In addition to the thin paper ( non-metallic ) covering the surface of the module , as long as the correct location of the touch, you can make hidden in the walls, desktops and other parts of buttons
The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the module output low, low power consumption; When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode
If you have any quarry regarding this product please contact us