PGSA2Z Nano V3.0 ATMEGA328P Module CH340C 5V 16M Mini USB Micro-Controller Board

  • Operating Voltage (logic level): 5V
  • 8 analog inputs ports: A0 ~ A7
  • 14 Digital input / output ports: TX, RX, D2 ~ D13
  • 1 pair of TTL level serial transceiver ports RX / TX
  • Using Atmel Atmega328P-AU MCU
  • There is a bootloader installed in it
  • Standard 0.1” spacing DIP (breadboard friendly)
  • Manual reset switch
  • If you have any quarry regarding this product please contact us

600.00

Out of stock

Notify Me when back in stock

Compare
Share

Product Description

DESCRIPTION

This is Nano board. It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one. This Arduino Nano is Original Arduino Nano Board. It is a breadboard-friendly board based on the ATmega328P from Arduino officials made in Italy. It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one. Nano’s got the breadboard-ability of the Boarduino and the Mini+USB with a smaller footprint than either, so users have more breadboard space. It’s got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other). This new version 3.0 comes with ATMEGA328 which offer more programming and data memory space. It is two layers. That makes it easier to hack and more affordable.

SPECIFICATION

 Model Type  Nano
 Color  Blue
 Microcontroller  ATmega328
 Operating Voltage (VDC)  5
 Input Supply Port  USB Mini
 Input Voltage(Recommended)  7-12 V
 Power Consumption (Watt)  1
 Analog I/O Pins  8
 Digital I/O Pins  22 (6 of which are PWM)
 PWM Output Pins  6
 Architecture  AVR
 Clock Speed  16 MHz
 Flash Memory  32 KB
 EEPROM  1 KB
 SRAM (KB)  2 KB
 Weight (gm)  7 gm
 Length (mm)  45 mm
 Width (mm)  18 mm

 

FEATURES

  • Operating Voltage (logic level): 5V.
  • 8 analog inputs ports: A0 ~ A7.
  • 14 Digital input / output ports: TX, RX, D2 ~ D13.
  • 1 pair of TTL level serial transceiver ports RX / TX.
  • Using Atmel Atmega328P-AU MCU.
  • There is a bootloader installed in it.
  • Standard 0.1” spacing DIP (breadboard friendly).
  • Manual reset switch.

PACKAGE INCLUDED

  • 1 x Arduino Nano
  • Operating Voltage (logic level): 5V
  • 8 analog inputs ports: A0 ~ A7
  • 14 Digital input / output ports: TX, RX, D2 ~ D13
  • 1 pair of TTL level serial transceiver ports RX / TX
  • Using Atmel Atmega328P-AU MCU
  • There is a bootloader installed in it
  • Standard 0.1” spacing DIP (breadboard friendly)
  • Manual reset switch

There are no reviews yet.

Be the first to review “PGSA2Z Nano V3.0 ATMEGA328P Module CH340C 5V 16M Mini USB Micro-Controller Board”