PGSA2Z Oscilloscope Kit DSO138 Oscilloscope, DSO 138 DIY Mini Oscilloscope, 2.4″ TFT 1MSPS Digital Oscilloscope Kit Handheld Pocket Sized 13803K

  • DSO 138 oscilloscope circuit boards components are pre-soldered, no need soldered by yourself.
  • DSO 138 Mini Oscilloscope uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board. Can freeze at any time waveform display (HOLD function).
  • DSO 138 Oscilloscope With automatic, regular and one-shot modes, easy to capture the moment waveform. Available rising or falling edge trigger. Observable previous trigger waveform (negative delay).
  • This oscilloscope With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values. Waveform storage function: will not lose the waveform after power off.
  • Adjustable vertical displacement and with instructions, which increase the likelihood of adding different features or developing new applications on the hardware for users.
  • If you have any quarry regarding this product please contact us.

2,150.00

Out of stock

Notify Me when back in stock

Compare
Share

Product Description

DESCRIPTION

  • Kits using ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display can be used as ARM test development board.
  • Available source, Capable people can be secondary development on the basis of the suite, for example, it can be changed to Millivoltmeter, data loggers, and so on (we don’t supply any technical support about that).
  • Circuit is simple and the kit is inexpensive.

FEATURES

  • PCB size: 117 x 76mm
  • Screen size: 52 x 40mm
  • Supply voltage: DC 9V

SPECIFICATION

  • Maximum real-time sampling rate: 1Msps
  • Accuracy: 12Bit
  • Sampling buffer depth: 1024 bytes
  • Analog bandwidth: 0 – 200KHz
  • Vertical Sensitivity: 10mV / Div-5V/Div (1-2-5 progressive manner)
  • Adjustable vertical displacement, and with instructions
  • Input impedance: 1MΩ
  • Maximum input voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)
  • Coupling modes: DC / AC / GND
  • The horizontal time base range: 10μs/Div-50s/Div (1-2-5 progressive manner)
  • With automatic, regular and one-shot mode, easy to capture the moment waveform
  • Available rising or falling edge trigger
  • Adjustable trigger level position, and with instructions
  • Observable previous trigger waveform (negative delay)
  • Can freeze at any time waveform display (HOLD function)
  • Comes 1Hz /3.3V square wave test signal source

PACKAGE INCLUDED

  • 1 x DSO138 Oscilloscope Kit
  • DSO 138 oscilloscope circuit boards components are pre-soldered, no need soldered by yourself.
  • DSO 138 Mini Oscilloscope uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board. Can freeze at any time waveform display (HOLD function).
  • DSO 138 Oscilloscope With automatic, regular and one-shot modes, easy to capture the moment waveform. Available rising or falling edge trigger. Observable previous trigger waveform (negative delay).
  • This oscilloscope With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values. Waveform storage function: will not lose the waveform after power off.
  • Adjustable vertical displacement and with instructions, which increase the likelihood of adding different features or developing new applications on the hardware for users.

There are no reviews yet.

Be the first to review “PGSA2Z Oscilloscope Kit DSO138 Oscilloscope, DSO 138 DIY Mini Oscilloscope, 2.4″ TFT 1MSPS Digital Oscilloscope Kit Handheld Pocket Sized 13803K”