Currently Empty: ₹0.00
-₹500.00
PGSA2Z Mega 2560 ATmega2560-16AU Board without USB Cable for Arduino
- The Mega is 100% compatible with Arduino IDE and most shields designed for the Arduino mega2560 r3，RoHS Compliant.
- The chip is Atmega2560-16au and Atmega16u2, same with the official version.
- Improved and expert version: 1. 0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Due that operate with 3. 3V. The second one is a not connected pin, that is reserved for future purposes.
- Stronger RESET circuit. Use 5. 5 * 2. 1mm DC barrel jack (compatible with 5. 5 * 2. 5mm DC barrel jack)
- It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
- If you have any quarry regarding this product please contact us.
Product Description
DESCRIPTION
Mega 2560 Arduino follows Open-source principles, which means you can freely download the development environment and many associated resources. Ideal for project work and often used in schools, teaching, motor control, robotics and similar applications; the Arduino platform allows for rapid application development using either Java (cross-platform) or Processing (a C derivative used to write sketches using Arduino IDE downloadable from Arduino.cc website). Input voltage should be limited to 6 ~ 12V, but if the voltage supplied is less than 6V, I / O port may not be supplied to a voltage of 5V, and therefore readings may become unstable. If the voltage is greater than 12V, the regulator device may overheat causing damage to the control board. It is therefore recommended that you supply between 6.5 and 12V, utilizing typical power supplies of 7.5V or 9V. Mega 2560 is fully compatible with the Arduino software and has complete hardware compatibility with the Mega 2560 Arduino Shield high-performance processor and enough memory to handle even complex solutions.
SPECIFICATION
- Microcontroller: ATmega2560
- Controller chip: Atmega2560-16au and Atmega16u2
- Operating Voltage: 5V
- Input: Voltage (recommended):7-9V
- Digital I/O Pins: 54 (of which 15 provide PWM output)
- Analog Input Pins: 16 DC
- Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 256 KB of which 8 KB used by bootloader
- SRAM: 8 KB
- EEPROM: 4 KB
- Clock Speed: 16 Mhz
- LED Built in: 13
- Length: 101.5 mm Width: 53.3 mm
PACKAGE INCLUDED
- 1 x Mega 2560 ATmega2560-16AU Board without USB Cable for Arduino
- The Mega is 100% compatible with Arduino IDE and most shields designed for the Arduino mega2560 r3，RoHS Compliant.
- The chip is Atmega2560-16au and Atmega16u2, same with the official version.
- Improved and expert version: 1. 0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Due that operate with 3. 3V. The second one is a not connected pin, that is reserved for future purposes.
- Stronger RESET circuit. Use 5. 5 * 2. 1mm DC barrel jack (compatible with 5. 5 * 2. 5mm DC barrel jack)
- It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
There are no reviews yet.