PGSA2Z Compatible CNC Shield V3 Engraving Machine/3D Printer/A4988 Driver Expansion Board

  • This shield is designed to allow you to control a CNC router or milling machine from an board.
  • It contains 4 driver sockets which allows compatible A4988 driver modules to be inserted providing the ability to drive 3 stepper motor axis (X,Y, & Z) plus an optional 4th auxiliary motor. Additional connectors provide easy connection of end stop sensors and control buttons.
  • GRBL 0.8c compatible. (Open source firmware that runs on an UNO that turns G-code commands into stepper signals)
  • 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
  • 2 x End stops for each axis (each axis pair shared by same IO pin) Spindle enable and direction connection.
  • If you have any quarry regarding this product please contact us

399.00

2 in stock

Compare
Share

Product Description

DESCRIPTION

This Expansion Board As A Driver Expansion Board Can Be Used For Engraving Machines, 3d Printers. It Has Total Of Four Slots, Can Drive Four A4988 Stepper Motor. Each Stepper Motor Only Need Two Io Ports. In Other Words, Six Io Ports Can Be Well Managed For Three Stepper Motors. Very Convenient To Use. Latest CNC Shield Version 3.03 Grbl 0.8c Compatible. (Open Source Firmware That Runs On An Uno That Turns G-Code Commands Into Stepper Signals) 4-Axis Support (X, Y, Z, A-Can Duplicate X, Y, Z Or Do A Full 4th Axis With Custom Firmware Using Pins D12 And D13) 2 X End Stops For Each Axis (6 In Total) Spindle Enable And Direction Coolant Enable Uses Removable Pololu A4988 Compatible Stepper Drivers. (A4988, Drv8825, And Others) Jumpers To Set The Micro-Stepping For The Stepper Drivers. (Some Drivers Like The Drv8825 Can Do Up To 1/32 Micro-Stepping ) Compact Design. Stepper Motors Can Be Connected With 4 Pin Molex Connectors Or Soldered In Place. Runs On 12-36v Dc. (At The Moment Only The Pololu Drv8825 Drivers Can Handle Up To 36v So Please Consider The Operation Voltage When Powering The Board.)

SPECIFICATION

  • Enlarged board to add a 4th Axis that can clone the X, Y, or Z-axis. With a 4th option to use pin D12-13 to control it.
  • Added a breakout header for all the Axis’s.
  • Added a communication header for UART (Serial) and I2C.
  • Added a connector for an optional fuse. (Fuse not supplies as it needs to be selected for the current that will be used.)
  • Capacitors are mounted horizontally giving more clearance between them and the stepper drivers. Good for ventilation.
  • Added a pull-up resistor on the axis enable pins. This prevents the pin from being in a floating state.
  • Added 2 mounting holes.

PACKAGE INCLUDED

  • 1 x CNC Shield V3
  • This shield is designed to allow you to control a CNC router or milling machine from an board.
  • It contains 4 driver sockets which allows compatible A4988 driver modules to be inserted providing the ability to drive 3 stepper motor axis (X,Y, & Z) plus an optional 4th auxiliary motor. Additional connectors provide easy connection of end stop sensors and control buttons.
  • GRBL 0.8c compatible. (Open source firmware that runs on an UNO that turns G-code commands into stepper signals)
  • 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
  • 2 x End stops for each axis (each axis pair shared by same IO pin) Spindle enable and direction connection.

There are no reviews yet.

Be the first to review “PGSA2Z Compatible CNC Shield V3 Engraving Machine/3D Printer/A4988 Driver Expansion Board”